Specify The Cable Connection Starting Frequency; Reboot The Cable Modem - NETGEAR Nighthawk CM2050V User Manual

Nighthawk CM2050V 2.5 Gbps Ultra-High Speed Cable Telephony Modem
Specify the cable connection starting
frequency
The starting frequency is automatically generated. For most Internet connections, you
do not need to specify this information. If you must enter a starting frequency, contact
your Internet provider.
To change the starting frequency:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is printed on the product label. The
user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Cable Connection.
The Cable Connection page displays the status of all downstream and upstream
channels.
5. In the Starting Frequency field, type a number as instructed by your cable Internet
provider.
6. Click the Apply button.
Your settings are saved.

Reboot the cable modem

Rebooting the cable modem disconnects all network connections to the cable modem's
local area network (LAN). After the cable modem is finished booting and reestablishes
a connection with the Internet, the devices on your network reconnect to the cable
modem's LAN.
To reboot the cable modem:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
Manage Your Network 22 User Manual