KickAss KADCDC25A-AND User Manual page 12

UNDERSTANDING SOLAR, ALTERNATOR
& CHARGING LIGHTS
SOLAR
ALTERNATOR
CHARGING
• Alternator has priority over solar therefore, if both solar and alternator are connected, only alternator LED is
solid and alternator is charging.
• 30 sec delay between cut-in voltage being reached and charging beginning & a 60 second delay before
NOTE
disconnecting when under cut-out voltage.
Alternator LED indicator
Alternator voltage 12V
0-8.9 Volts
9-12.6 Volts
12.7-13.1 Volts
13.2 Volts
Alternator LED indicator with ignition override wire connected
Alternator voltage 12V
0-8.9 Volts
9-11.6 Volts
11.7-12.1 Volts
12.2 Volts
Solar LED status
Solar voltage
0-8.9 Volts
9 Volts
Solid on - cut-in voltage reached.
(see table below for other indications)
Solid on - cut-in voltage reached.
(see table below for other indications)
Charging light will flash when unit is charging.
Alternator voltage 24V Alternator LED
12-17.9 Volts OFF
18-25.2 Volts Flash 1 sec on 5 sec off
25.3-26.3 Volts Flash 1 sec on 1 sec off
26.4 Volts Solid on
Alternator voltage 24V Alternator LED
12-17.9 Volts OFF
18-23.2 Volts Flash 1 sec on 5 sec off
23.3-24.3 Volts Flash 1 sec on 1 sec off
24.4 Volts Solid on
Solar LED
OFF
Solid on
Status
Under cut-in voltage
Cut-in voltage reached, charging will begin after 10 sec
delay (please note alternator has priority over solar)
11
Status
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay
Status
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay