Directing The Display Output When You Turn On The Computer - Toshiba M780-S7211 User Manual

2 Connect the monitor's video cable to the RGB (monitor) port
on the back of the computer.
3 Connect the device's power cable to a live electrical outlet.
4 Turn on the external device.
Your computer will automatically detect the external display
device.
NOTE

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1 Press
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
❖
❖
❖
Using external display devices
In the future you can change the display settings by pressing
, or by configuring the display properties settings.
Fn + F5
Some modes are only available with the appropriate device attached
and turned on.
):
Fn + F5
and simultaneously.
Fn F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Getting Started
, press repeatedly until the setting
Fn F5
79
F5