Using The Ultra Slimbay Ii; Removing A Module From The Ultra Slimbay Ii - Toshiba M780-S7211 User Manual

148
Exploring Your Computer's Features

Using the Ultra SlimBay II

Using the Ultra SlimBay II
The Ultra SlimBay II gives you additional flexibility. By inserting
and removing Ultra SlimBay II modules, you can configure your
computer for the task at hand without having to carry unnecessary
components with you when you travel. For example, any one of
several modules can be used in the Ultra SlimBay II:
❖
Optical disc drive
❖
Secondary hard disk drive (HDD)

Removing a module from the Ultra SlimBay II

NOTE
1 Do one of the following:
❖
❖
HINT: Items from this list that did not come with your computer can
be purchased separately. See the accessories information packaged
with your system or visit accessories.toshiba.com.
Use caution when lifting or turning your computer. Failure to do so
may result in damage to components, such as cables, attached to
your computer, or to the computer itself.
Turn off the computer.
Leave the computer on and hot swap the module. First,
stop the module by clicking the Safely Remove
Hardware icon on the System tray, then selecting the
module to be removed. If the system is unable to prepare
the module for safe removal, a message will tell you to try
again later. If the module can be removed now, the system
displays Safe to Remove Hardware. After the module is
stopped, it is safe to remove it.
Before you turn the computer over, make sure that the computer
display is properly closed and is not in tablet mode. Setting the
computer down on the display may cause damage to the screen.