Telrad CPE12000 Series User Manual page 93

For SNMP, CPE serves as the server, users can use the tool such as MIB browser as the
client to connect to CPE and do remove control.
 SNMP Server: The type of the server. It includes SNMPv2c, SNMPv3.
 SNMP MIBS Version: 1.4.2
 SNMP Read-Only Community (SNMPv2 only): The "SNMP Community string" is like a
user id or password that allows access to a router's or other device's statistics. If the
community string is correct, the server responds with the requested information.
 SNMP Read-Write Community (SNMPv2 only): The "SNMP Community string" is like
a user id or password that allows access to a router's or other device's statistics. If the
community string is correct, the server responds with the requested information.
 SNMP Trap (SNMPv2 only): A way for an agent to send an asynchronous notification
to the trap server. The traps that an agent can generate are defined by the MIBs it
supports.
 SNMP Trap Community (SNMPv2 only): The "SNMP Community string" is like a user
id or password that allows access to a router's or other device's statistics. If the
community string is correct, the server responds with the requested information.
 SNMP Trap Server IP Address: As titled.
 SNMP Trap Server Port: As titled.
 Contact: The name or organization responsible for the switch.
 System Name: The name that identifies the SNMP agent.
 Location: A location for the SNMP Agent.
 Latitude: A part of geo-location attributes.
 Longitude: A part of geo-location attributes.
 Height: A part of geo-location attributes.
 Reboot Requirement: A remainder to let users know that CPE needs to reboot to
have something taken effect.
LTE Outdoor CPE12000 | User Manual
Management > RM Settings (SNMP)
93