Telrad CPE12000 Series User Manual page 50

information.

If "Static" mode is selected, users have to manually enter the required information in
below fields.
Host Name: currently no function.
WAN IP Address/ Subnet Mask/ Gateway Address: These values are un-editable when the
connection mode is "Automatically" and editable when the mode is "Static".
WAN MTU: This value is "Maximum Transmission Unit". The size of a single packet can only
be as large as MTU. If the size of the packet exceeds MTU, the packet would be fragmented.
Enable NAT-Q: enable/disable wan accelerator
DNS1/2: Domain Name Server, editable when users select "Static" in "Connection Mode".
Otherwise, DNS information will be given by DHCP server.
Cancel button
Apply button
LTE Outdoor CPE12000 | User Manual
Two WAN IP, DNS
Reset fields to the last saved values.
Commit the changes made and save to the CPE device, some
services will be reloaded.
50