Special Cleaning And Packaging Procedures; Akh2.2 - K V Data And C V Data (Din En 60534-2-3) - Flowserve AKH2.2 Technical Manual

Ahaus GmbH
von-Braun-Straße 19a
D-48683 Ahaus
Postfach 1162 D-48661 Ahaus
Telefon: +49(0) 2561-686-100
Fax: +49(0) 2561-686-200

Special cleaning and packaging procedures

1. Recleaning
The ball valve should be thouroughly cleaned with a clean, dry, lint-free towel and blown off with
dry nitrogen gas. This will assure that the valve is free from moisture, grease and other media
before packing.
2. Packing
Prior to packing, the ball valve should be jig welded in a PE-foil (0.2 mm thick). The bag contains
desiccants acc. to DIN 55473, quantity acc. to DIN 55474 and a moisture indicator.
AKH2.2 - K
Technical Manual
DATA and C
v
DIN ANSI
015 ½"
020 ¾"
025 1"
032 -
040 1 ½"
050 2"
065 -
080 3"
100 4"
AKH2.2 - atomac ball valve - full port
Data (DIN EN 60534-2-3)
v
K C
V
m³/h gal/min
16,9 19,6
24,4 28,4
38,6 44,9
68,4 79,5
121,4 141,1
199,9 232,3
329,3 382,7
525,8 611,1
940,2 1092,8
Register:
Page:
Date: 04.1995
Revision: 06.2020
V
12
16