Cleaning And Maintenance; Efficient Ventilation - Beko HNT62210B User Manual

Table of Contents

Available languages

Cleaning and maintenance

5.1 Functions of the hood

The hood can be operated in kitchens with and

without flue.

5.2 Active carbon filter

An active carbon filter should be used in flueless

environments for filtering and supplying the air

back inside. Active carbon should be supplied from

the service or your dealer.

5.3 Usage with carbon filter

Your product can be operated with carbon filter.

As the carbon filter is used in a kitchen that does

not have a flue outlet, it should be replaced with a

new one every 3 to 5 months depending on usage.

Carbon filter should never be washed. In any case,

the oil filters should be attached to the product

regardless of using a carbon filter or not. Do not

use your product without a filter.

5.4 Carbon filter replacement

De-energise the appliance before

replacing the carbon filter. To install

the carbon filter in its place, align

the chamfers on the motor housing

and then rotate in the clockwise di-

rection. Rotate in counter-clockwise

direction to remove.

WARNING: Aluminium filters can be

washed in a dishwasher. The alumi-

nium filters may alter in colour after

several washes. This is normal and

does not require the replacement

of the filters.

5.5 Efficient ventilation

For an efficient ventilation in the kitchen, the

outward windows of the kitchen should be kept

closed. Operate the hood and the hob at the same

Hood / User Manual

time to create air flow. This will positively affect

the suction power.

After completing the cooking, let the appliance

operate for a while to remove the remaining odo-

urs and steams.

Care must be taken when the app-

liance is used with devices that use

air and fuel (e.g. heaters, water

heaters that operate on gas, diesel

fuel, coal or wood). This is because

it may decrease combustion as the

hood discharges air into the room

atmosphere.

This is not valid for use without flu-

es.

5.6 Maintenance

• Unplug and disconnect the product before any

maintenance and cleaning operation.

• Aluminium cartridge filter collects the dust and

oil particles in the air.

• Wash the metal filter once a month with hot

water and soap or in dishwasher if possible (60

degrees).

• Press the spring catch on the tip to dislodge the

aluminium cartridge filter. After cleaning, let it

dry well before reinstalling.

• The exterior surface of the hood should be

wiped clean with a cloth damped with soap and

water or alcohol.

• Do not let the electronic parts get in touch with

water or similar substances.

• INOX cleaning and maintenance products found

in the market will prolong the life of your pro-

duct.