Disabling Or Enabling The Touchpad; Using External Display Devices; Connecting An External Monitor Or Projector - Toshiba NB255-N240 User Manual

NOTE

Disabling or enabling the TouchPad™

The TouchPad™ is enabled by default. To enable/disable the
TouchPad, press
enabling the TouchPad™" on page
NOTE

Using external display devices

Your computer comes with a built-in display, but you can also
connect an external display device via the RGB (monitor) port.

Connecting an external monitor or projector

You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Read the directions that came with the monitor to see if you
first need to install new software.
2 Connect the monitor's video cable to the RGB (monitor) port
on the side of the computer.
3 Connect the device's power cable to a live electrical outlet.
4 Turn on the external device.
Your computer will automatically detect the external display
device.
NOTE
Using external display devices
TouchPad setting options vary by computer model. The TouchPad
settings are accessible through the Mouse Properties option of the
Windows Control Panel. For more information, please visit
www.support.toshiba.com, and enter the phrase "Mouse pointer
jumps around as you type" into the Search field.
. For more information, see
Fn + F9
Alternately, you can disable only the tapping feature. If you disable
tapping only, you can still use the TouchPad's control buttons and
move the pointer by sliding your finger on the TouchPad. To disable
tapping only, use the Mouse Properties option in the Windows
Control Panel.
In the future you can change the display settings by pressing
, or by configuring the display properties settings.
Fn + F5
Getting Started
"Disabling or
173.
67
®