Accessories; Service And Maintenance - Festool OF 2200 EB Operating Manual

When trimming edges, always use the chip deflec-
tor KSF-OF to improve dust extraction.
d) Routing with a guide system FS
The guide system (partly as an accessory) makes
it easier to route straight grooves.
fSecure the guide rail to the workpiece using
clamps [16.4].
fInsert the base runner [16.3] for the guide stop
into the router base (see "Changing the base
runner").
L
This base runner is offset to compensate for
the height of the guide rail.
fSecure both guide rods [16.6] with the rotary
knobs [16.5] and [16.9] on the guide stop.
fUnscrew the rotary knob [16.1].
fInsert the guide rods [16.6] into the grooves on
the router base.
fPlace the router with the guide stop on the
guide rail.
fIf required, you can adjust the play of the guide
stop on the guide rail by adjusting the two guid-
ance jaws [16.2] with a screwdriver.
fSlide the router along the guide rods until the
routing tool reaches the required distance X
from the guide rail.
fScrew up the rotary knob [16.1].
fUnscrew the rotary knob [16.10].
fTurn the adjusting wheel [16.7] to adjust dis-
tance X more precisely.
L
Hold the adjusting wheel [16.7] to turn the
scale [16.8] independently to "zero".
fScrew up the rotary knob [16.10].
8.2 Changing the base runner
Festool offers special base runners (as an acces-
sory) for different applications.
Change the base runner as follows:
fLay the machine on its side on a stable base.
fOpen the lever [14.4].
fRemove the base runner [14.1].
fRelease the lever [14.4] again.
fInsert the tabs [14.2] on a base runner into the
router base.
fPush down the base runner until it engages in
the router base.
Before using the base runner: remove the pro-
tective foil!
8.3 Aluminium processing
WARNING
Risk of accident - always perform the following
safety measures when routing aluminium:
fAdd a residual-current circuit-breaker (FI,
PRCD).
fConnect the machine to a suitable dust ex-
tractor.
fRemove dust deposits from the motor hous-
ing on a regular basis.
fWear protective goggles.
9

Accessories

For your own safety, use only original Festool ac-
cessories and spare parts.
The accessory and tool order number can be
found in the Festool catalogue or on the Internet
under "www.festool.com".

10 Service and maintenance

WARNING
Risk of accident, electric shock
fAlways pull the plug out of the socket before
performing any type of work on the machine.
fAll maintenance and repair work which re-
quires the motor housing to be opened, must
only be carried out by an authorised service
workshop.
To ensure constant air circulation, always keep
the cooling-air openings in the motor housing
clean and free of blockages.
The machine is equipped with self-disconnecting
special carbon brushes. If they are worn, power
is interrupted automatically and the machine
comes to a standstill.
Customer service and repair. Only
through manufacturer or service work-
shops: Please find the nearest address
at: www.festool.com/Service
Use only original Festool spare parts!
EKAT
4
Order No. at: www.festool.com/Service
5
3
2
1
OF 2200 EB
23