Table of Contents
Advertisement
Installing additional memory (optional)
8
Gently put the memory module connector down at an
angle and press down until the clips snap into place.
Do not force the memory module into position. The
memory module should be level when secured in place.
Sample inserting the memory module
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
9
Replace the expansion memory module slot cover.
10
Replace the screw and tighten it.
11
Turn the computer over and reconnect any cables you
removed.
12
Turn on the computer.
To verify that the computer correctly recognizes the
memory, click Start, Control Panel and click
Performance and Maintenance. Click System to view
the recognized memory.
13
If the computer does not recognize the memory module,
shut down the computer, remove the expansion memory
module slot cover, and make sure the memory module is
seated properly, as described in step 8.
Getting Started
61
Advertisement
Table of Contents
