Table of Contents
Advertisement
124
Mobile Computing
Changing the main battery
Sample removing the battery
Inserting the battery into the computer
Assuming you just removed the battery pack (see
the battery from the computer" on page
1
Place the battery pack in the battery compartment.
2
Ensure the battery release latch clicks into place.
3
Slide the battery release lock to the locked position.
4
Turn the computer right side up.
5
Reconnect the cables and turn on the computer.
If the battery is leaking or its case is cracked, put on protective
gloves to handle it, and discard it immediately following the
advice in
"Disposing of used batteries safely" on page
If the battery does not slide into the slot easily, move the
battery release lock to the unlocked position and try again. Do
not force the battery into position.
"Removing
122):
127.
Advertisement
Table of Contents
