English - Electrolux Renew 800 Instruction Book

ENGLISH

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for your product. This product is designed with
the environment in mind. All plastic parts are marked for recycling purposes.
It may be possible that your steam iron does not produce steam immediately after filling it with water. The reason for
this is that air trapped in the inner system can delay this function a few seconds. Please be patient and try it again by
pressing the steam on/off button. For your convenience the steam will be produced after you release the steam on/
off button for a few seconds and it is not necessary to press the button all the time. Find out your rhythm for the best
steaming result.
COMPONENTS
A. Hot soleplate indicator
B. Water spray nozzle
C. Light indicator for heat-up/cool-down
D. Headlight illuminating ironing area
E. Touch screen for temperature-steam programme
selection
F. Reminder for Flush Clean & replacing Soft Water
Activator
G. Steam jet button
H. Spray button
I. Steam on/off button
Picture page 2-4
GETTING STARTED AND OPERATING INSTRUCTIONS
1
Before first use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to
remove foreign particles. Position the steam iron horizontally on the ironing-board or on a heat resistant, secure
surface at the same height as an ironing-board. Unwind and straighten the power cord.
2
Fill the steam iron with water. Make sure, the plug is outside the power outlet. Raise the heel of the iron, open
the filling aperture cover (P). Use the water filling container provided (R), pour water to maximum level (M). Close
the cover (P). This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense
filtered water resp. a mix of 50% distilled, 50% tap water if the tap water is particularly hard.
Always refill the water tank to MAX level using cold water.
Caution! Never operate the appliance without any water in the tank.
This product is equipped with a detachable Soft Water Activator (L), we recommend to replace when the reminder
for Flush Clean & replacing Soft Water Activator (F) is flashing.
Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are
transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.
3
Connect the steam iron to the mains supply. Select the ironing programme from the touch screen (E) on the
steam iron. The light indicator (C) on the iron will pulsate when preheating. When turned on for the first time,
temporary vapours/odours may occur. The iron is equipped with an auto-steam function, which automatically
adjusts the steam output to the selected ironing programme supporting best ironing results.
4
As soon as the selected temperature has been reached, the lights indicator (C) is on permanently and the head-
light (D) turns on. Now the iron is ready to be used.
5
To activate the steam function, press and hold the steam on/off button (I) for 3-5 seconds.
6
For extra steam, press the steam jet button for one second.
Iron with extra steam: Press the steam buttons the same time for improved crease removal. When releasing the
buttons, use up the steam before putting the iron back on its heel.
Caution! Never release steam while the iron is standing on its heel.
Dry ironing: When not pressing steam buttons, the iron will be in dry mode.
7
Using the spray mist. Pre-damp fabrics by pressing the spray button several times to release a fine mist; ensure
the tank is at least half full.
8
Steam hanging items. The vertical steam function is ideal for curtains and suits. Hold the iron at a distance of
10-20 cm and press the steam jet button.
9
The iron is equipped with 3-way auto-off function. If the iron is left unattended on soleplate or the side, it au-
6
J. Power cord
K. Flush Clean button
L. Soft Water Activator, replaceable
M. Water tank with max level indicator
N. Cord wrap facility
O. RESILIUM anodized ski-sloped soleplate
P. Water fill & Water Softener System cover
Q. Iron heel
R. Water filling container
www.electrolux.com