Product Overview; Controls - Toro Greensmaster TriFlex 3300 Operator's Manual

Product Overview

1. Engine
2. Roll bar
3. Control panel
4. Seat

Controls

Traction Pedal
The traction pedal (Figure
to make the machine move forward, to move it
backward, and to stop the machine. Press the top
of the pedal to move forward and the bottom of the
pedal to move backward or to assist in stopping when
moving forward. Also, allow the pedal to move to the
neutral position to stop the machine. For your comfort,
do not rest the heal of your foot on the reverse pad of
the traction pedal when you are driving the machine
forward. (Figure 13).
Figure 11
5. Steering wheel
6. Traction pedal
7. Footrest
8. Cutting units
12) has 3 functions:
1. Traction pedal—forward
2. Taction pedal—reverse
g014674
Ground speeds are as follows:
•
3.2 to 8 km/h (2 to 5 mph) forward mowing speed
•
16 km/h (10 mph) maximum transport speed
•
4.0 km/h (2.5 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal
steering arm for operator comfort, then, release the
pedal to lock the arm in place.
Throttle Lever
Use the throttle lever
of the engine. Move the throttle lever toward the F
position to increases the engine speed; move it toward
the S position to decrease the engine speed.
LOW
Note:
You cannot stop the engine using the throttle
lever.
15
Figure 12
3. Steering-arm-locking
pedal
Figure 13
(Figure 12) and raise or lower the
(Figure 14) to control the speed
g014603
g005105
AST