Indicator Lights - Toro T4240 Operator's Manual

Fuel Gauge
The fuel gauge shows the amount of fuel in the tank
(Figure 17).
Figure 17
Hour Meter
The hour meter shows the total hours that the machine
has been operated (Figure

Indicator Lights

Engine Pre-Heat Indicator Light
Turn the ignition key to position II. The engine preheat
indicator light will illuminate
glow plugs.
Important:
Attempting to start a cold engine
before using the pre-heat can cause unnecessary
wear to the battery.
Figure 18
Transmission-Neutral-Indicator Light
The transmission-neutral-indicator light
illuminates when the travel control pedal is in the
N position and the ignition key is turned to
EUTRAL
position I.
Note:
The parking brake must be engaged for the
transmission neutral indicator light to illuminate.
Figure 19
g014558
3).
(Figure 18) and heat the
g029199
(Figure 19)
Cutting-Unit-Drive-Switch Indicator Light
The cutting-unit-drive-switch indicator light
illuminates when the cutting unit drive switch is in the
O position and the ignition key is turned to position I.
FF
Parking-Brake-Indicator Light
The parking-brake-indicator light
illuminates when the parking brake is engaged and
the ignition key is turned to position I.
Hydraulic-Transmission-Filter-Indicator Light
The hydraulic-transmission-filter-indicator light
22) illuminates when the transmission filter element
is blocked.
Note:
The engine must be running for the indicator
light to illuminate. The indicator light may illuminate
briefly when the hydraulic oil is cold.
g029211
16
(Figure
Figure 20
(Figure 21)
Figure 21
Figure 22
20)
g029212
g029251
(Figure
g029370