Safety; General Safety; Safety And Instructional Decals - Toro T4240 Operator's Manual

Safety

This machine has been designed in accordance with
EN ISO 5395.

General Safety

This product is capable of amputating hands and feet
and of throwing objects.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not put your hands or feet near moving
components of the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Jacking point
1. Warning—stop the engine and remove the ignition key
before releasing or operating safety latches.
70-13-072
70-13-077
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep children, bystanders, and pets out of the
operating area. Never allow children to operate
the machine.
•
Shut off the engine, remove the key, wait for all
movement to stop before you leave the operator's
position. Allow the machine to cool before
adjusting, servicing, cleaning, or storing it.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
decal70-13-072
1. Diesel fuel
decal70-13-077
4
, which
70–13–078
decal70-13-078