Connecting The Device To Networks; Commissioning A Device; Instructions For Commissioning - Siemens SENTRON 7KN POWERCENTER 3000 Manual

4.4

Connecting the device to networks

For integration into existing or planned system environments and networks, the following
options are available.
Ethernet
You can use the integrated Ethernet interfaces (10/100/1000 Mbps) for communication with
the devices and applications stated in Application examples (Page 89). Via Industrial Ethernet,
you network the 7KN Powercenter 3000 and other devices.
4.5

Commissioning a device

4.5.1

Instructions for commissioning

Danger of burns
The surface of some devices can reach a temperature of over 70 °C (160 °F). These devices
are marked with labels indicating this.
• Touching without protection can result in burns.
• Avoid touching directly during operation.
• Only touch the device with suitable protective gloves.
Requirements
• The ground conductor has been connected.
• The device is connected to the power supply.
• The connecting cables are plugged in correctly.
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
CAUTION
Installing, connecting, commissioning
4.4 Connecting the device to networks
33