4.1.3.1
Upright mounting
The upright mounting is suitable for vertical mounting of the device. The mounting bracket
provided for this permits space-saving installation with DIN rail and wall mounting.
Requirements
• Mounting bracket
Note
Use only the screws supplied to mount the mounting bracket. Longer screws can damage
the interior of the device
• A T10 screwdriver
• Two wall plugs and two screws
Procedure – upright mounting
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
Installing, connecting, commissioning
1.
Place the mounting bracket on the mounting
surface.
2.
Mark out the mounting holes.
3.
Drill the mounting holes.
4.
Place the wall plugs in the drilled holes.
5.
Fasten the mounting bracket with 2 screws.
6.
Screw the device to the mounting bracket
with the two screws supplied.
4.1 Preparing installation
23