Advanced mode, 16bit colour resolution:
13C d
CHANNEL 1: GREEN, to control the light output of the green leds, from OFF to the Max Power.
CHANNEL 2: GREEN fine, 16bit regulation of green leds
CHANNEL 3: RED, to control the light output of the red leds, from OFF to the Max Power
CHANNEL 4: RED fine, 16bit regulation of red leds
,
CHANNEL 5: BLUE
to control the light output of the blue leds, from OFF to the Max Power.
CHANNEL 6: BLUE fine, 16bit regulation of blue leds
,
CHANNEL 7: AMBER
to control the light output of the amber leds, from OFF to the Max Power.
CHANNEL 8: AMBER fine, 16bit regulation of amber leds
CHANNEL 9: STROBE
This channel sets the parameters of the strobe effect.
On the following table you have the dmx values, the strobe frequency (flash speed) and the strobe hold.