Polycom EagleEye Mini User Manual page 36

Procedure
1. Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2. Go to Admin Settings > Certificates.
3. Set the Always Validate Peer Certificates From Server option to On.
Create a Certificate Signing Request
You can create a Certificate Signing Request (CSR) and send it to a CA to get a certificate to authenticate
your USB device. You may need to authenticate your USB device while connecting to your provisioning
server.
Note: To create a Provisioning User Certificate, you must use the Polycom Companion application to
generate the CSR.
Procedure
1. Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2. Go to Admin Settings > Certificates.
3. Select Create.
4. Configure the following settings on the Create Signing Request page:
Field
Country
State or Province
City or Locality
Organization
Organizational Unit
Managing the EagleEye Cube USB Device
Description
Specifies the country where your organization is
located.
Note: For EagleEye Cube USB, input a two-
character country code following
3166-1 alpha-2 rules.
Specifies the state or province where your
organization is located. Default is blank. Maximum
characters: 128.
Specifies the city where your organization is
located. Default is blank. Maximum characters:
128.
Specifies your organization name.
Specifies the unit of business defined by your
organization. Default is blank. Maximum
characters: 64.
ISO
34