Inserting Pc Cards - Toshiba Satellite 5205 Series Resource Manual

10

Inserting PC Cards

Removing a memory module
1 Follow steps 1 through 6 in "Installing additional
memory (optional)" on page 7.
2 Gently push the memory clips outward until the memory
module pops up.
3 Gently pull the memory module out of the slot.
4 Complete the procedure by following steps in "Installing
additional memory (optional)" on page 7.
Inserting PC Cards
Inserting a PC Card
1 If your PC Card does not support hot swapping, save
your data and turn off the computer before inserting the
PC Card. For more information, see "Hot swapping" on
page 11.
2 Hold the PC Card with the arrow or main label side up
and the connector side toward the PC Card slot.
3 Align the card connectors with the PC Card slot and
carefully slide the card into the slot until it locks into
place.
If you have a Type III card, insert the connector into the lower slot. If
you have a Type II card, you can insert it into either the upper or the
lower slot.
To avoid damaging the PC Card or the computer, don't force the card
into the PC Card slot.