Removing Pc Cards; Hot Swapping - Toshiba 3000-S304 User Manual

3 Align the card connectors with an available PC Card slot
and carefully slide the card into the slot until it locks into
place.
NOTE: If you have a Type III card, insert the connector into the
lower slot. If you have a Type I or Type II card, you can insert it into
either the upper or the lower slot.
There are two eject buttons, one per slot.
CAUTION: To avoid damaging the PC Card or the computer, don't
force the card into the PC Card slot.

Removing PC Cards

1 Click the PC Card icon in the system tray.
2 Click Stop xxxx where xxxx is the identifier for your PC
Card.
The operating system advises you that you may safely
remove the card.
3 To remove the PC Card, press the slot's eject button once.
4 Remove the PC Card and store it properly.

Hot swapping

One of the great things about PC Cards is that you can
replace one PC Card with another while the computer is on.
This is called "hot swapping."
Exploring Your Options
Using PC Cards
163