Removing A Disc With The Computer On; Removing A Disc With The Computer Off - Toshiba 3000-S304 User Manual

Removing a disc with the computer on

CAUTION: Check the DVD-ROM, CD-ROM, CD-RW or DVD-
ROM/CD-RW drive-in-use indicator light when you use the DVD-
ROM, CD-ROM, or CD-RW drive. Do not press the eject button,
disconnect a drive, or turn off the computer while the light is
glowing. Doing so could damage the CD, DVD, or drive.
1 Locate and press the eject button.
The disc tray partially opens.
2 Grasp the sides of the disc tray and pull it fully open.
3 Remove the disc from the disc tray and place it in its
protective cover.
CAUTION: If the disc is spinning when you open the disc tray, wait
for the disc to stop before removing it.
4 Close the disc tray by pressing gently on the center of the
tray until it clicks indicating that it is locked.

Removing a disc with the computer off

1 Insert a slender object, such as a straightened paper clip,
into the manual eject button access hole.
CAUTION: Never use a pencil to press the manual eject button.
Pencil lead can break off inside the computer and damage it.
2 Pull the tray fully open, remove the disc and place it in its
protective cover.
3 Close the disc tray by pressing gently on the center of the
tray until it clicks indicating that it is locked.
Learning the Basics
Using your CD or DVD drive
81