Table of Contents
Advertisement
54
Getting Started
Using external display devices
2
Release the
TECHNICAL NOTE: You can also change these settings using the
Display Properties window in the Control Panel.
Adjusting the quality of the external display
To obtain the best picture quality from your external display
device, you may need to adjust the video settings. See the
documentation supplied with the device for additional
configuration steps.
TECHNICAL NOTE: In order to use the simultaneous mode, you
must set the resolution of the internal display panel to match the
resolution of the external display device. The external display
device must support a resolution of 640 X 480 or higher.
Display limitations
Keep in mind that the quality of the display will be limited to
the capabilities of the external video device.
If the external video device, such as an SVGA monitor, is
capable of displaying at a maximum resolution of 640 x
480 and your system is set for a higher resolution, only
part of the desktop will appear on the screen. You can
view the "lost" area by scrolling to it.
Built-in display panel and external monitor
simultaneously
External monitor only
Built-in display panel and external video device
simultaneously
Other external video device only
key.
Fn
Advertisement
Table of Contents
