Table of Contents
Advertisement
48
Getting Started
Installing additional memory (optional)
Removing the expansion memory slot cover screw
5
Using your finger or a narrow object, lift off the cover.
6
Put the screw and the cover in a safe place so that you can
retrieve them later.
CAUTION: Static electricity can damage the memory module.
Before you handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
gold connector bar (on the side you insert into the computer).
7
Remove the new memory module from its antistatic
packaging.
8
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the slot at
a slight angle.
9
Gently press down on the memory module connector
until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Advertisement
Table of Contents
