Inserting A Charged Battery - Toshiba 2410-S204 User Manual

Inserting a charged battery

1 Turn off the computer.
See
2 Remove the battery.
See
page
3 Release the battery from the battery cover.
See
page
4 Wipe the battery terminals of the charged battery with a
clean cloth to ensure a good connection.
5 Hold the charged battery so that the label is face down.
6 Fit the battery in the battery cover, ensuring the battery
connectors are exposed. Make sure the battery is secured
by the battery cover latches.
7 Find the four side tabs on the battery cover and line them
up with the corresponding recessed areas along the sides
of the empty battery slot. When the tabs line up with the
recessed areas, the battery cover will slip comfortably
into the battery slot.
8 Once the battery cover has been inserted, slide the battery
cover until the side of the battery release latch matches
the side of the computer.
9 Slide the battery release latch toward the back of the
computer. You may need to press the cover in from the
edge slightly to return the latch to the closed position.
"Turn Off or Shut down command" on page 94
"Removing the battery from the computer" on
121.
"Removing the battery from the battery cover" on
122.
Mobile Computing
Changing the main battery
123