Performance Pads - Numark Mixtrack Pro III Quick Start Manual

Performance Pads

The bottom row of pads is dedicated to Cue Points:
• CUES 1-4: Pressing the bottom 4 pads will add and play up to 4 Cue
Points. Holding SHIFT and pressing a pad will delete the specific Cue
Points.
The top row of performance pads have different modes you can select. They
are Manual Loop mode, Auto Loop mode and Sampler mode. Hold the PAD
MODE button and press pads 1-3 to enable each performance pad mode.
• AUTO 1/Manual Loop mode: Pressing pad 1 will start and set a Manual
Loop In point, pad 2 will set the Loop Out point and pads 3 and 4 will
turn the Loop On/Off and Retrigger the loop.
• AUTO 2/Auto Loop mode: When pressing pads 1-4 you can activate Auto
Loops of different sizes. Hold Shift and press pads 1-4 to enable Loop
Rolls of that size.
• AUTO 3/Sampler Mode: Pads 1-4 will trigger samples loaded in slots 1-4
of your Sample Banks. Holding SHIFT and pressing pads 1-4 will stop
the sample playing. When a sample slot is empty, pressing the pads
1-4 will load the currently selected track in library to the corresponding
sample slot.
DJ-FX
The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab
to open the FX panel. Select either 1, 2 or M to assign the
selected effect bank to a deck or Master Output.
There are two available modes in the DJ-FX. Single FX Mode allows you
to select one effect per FX bank, and has multiple parameters that can be
adjusted. Multi FX Mode allows you to select up to three effects per FX bank,
and adjust only one parameter, the FX Depth. The same effects available
in Single FX mode are available in Multi FX mode, as well some additional
presets.
You can select between the two FX modes by clicking either the Single FX
mode button or Multi FX mode button
Mixtrack Single FX Mode
Pro III
Control
FX 1 Turn FX slot On
FX 2 Adjust FX
parameter 1
FX 3 Adjust FX
parameter 2
TAP Tap DJ-FX tempo
BEATS Adjust beats
timing multiplier
TOUCH Adjust FX depth
STRIP
in the software.
Multi FX Mode Shift
Turn FX slot 1 On Select next FX in slot
(Multi FX only)
Turn FX slot 2 On Select next FX in slot
(Multi) FX only
Turn FX slot 3 On Select next FX in slot
(Multi FX only)
Tap DJ-FX tempo Change FX mode
(Single/Multi)
Adjust beats N/A
timing multiplier
Adjust FX depth Skip search track