Installing A Device In The Modular Bay; Charging The Battery - Toshiba 1000-S157 User Manual

2 Plug the AC adapter into the DC-IN jack on the back of
the computer.
To locate the DC-IN jack, see
3 Connect the power cable to a live electrical outlet.
The AC power and battery lights glow.
CAUTION: Using the wrong AC adapter could damage your
computer. Toshiba assumes no liability for any damage in such
cases.
Never pull directly on the power cable to unplug it. Hold the power
plug when removing the cable from the outlet.

Installing a device in the Modular Bay

To install a device such as a diskette drive or other module,
follow these steps:
1 Tilt the computer until the front is facing upward.
2 Insert the Modular Bay device and push it firmly until it
is properly seated.

Charging the battery

Before you can use the battery to power the computer, you
must charge it. Connect the computer to a live power outlet
using the AC adapter and power cable. The on/off light glows
green and the battery light glows amber to show that it is
charging.
Once the computer is connected to a power outlet, you can
charge the battery with the computer turned off or on. It takes
several hours to charge the battery when the computer is off.
It takes much longer to charge the battery when the computer
Getting Started
Charging the battery
"Back" on page
47
27.