Problems When You Turn On The Computer - Toshiba 1000-S157 User Manual

2 Press
clipboard.
3 Open Notepad (click Start, point to All Programs, then
point to Accessories and click Notepad).
4 Press
Notepad.
5 Add a paragraph break and type some notes describing
what you were doing when you received the message.
6 Save the file and refer to it when you contact the software
manufacturer.

Problems when you turn on the computer

These problems may occur when you turn on the power.
The computer will not start.
Make sure you attached the AC adapter and power cable
properly or installed a charged battery.
Press and hold down the power button for a few seconds.
If you are using the AC adapter, check that the wall outlet is
working by plugging in another device, such as a lamp.
The computer starts but, when you press a key, nothing
happens.
You are probably in Standby mode and have a software or
resource conflict. When this happens, turning the power on
returns you to the problem instead of restarting the system.
To clear the condition, press the power button until it turns off
the computer.
Clearing the condition may get the computer running, but it
won't solve a resource conflict. Read the documentation that
came with the conflicting device and
conflict" on page
Problems when you turn on the computer
and simultaneously to copy the text to the
Ctrl c
and simultaneously to paste the details into
Ctrl v
185.
If Something Goes Wrong
"Resolving a hardware
181