(See Figure 703 Or Ipl Figure 1, Item 185); Figure 702. Rear Cover Installation Diagram - L3 FA5000 Maintenance Manual

rear cover (1−10) to the rear part of the Shielded Housing (1−5). Tighten
screws to a torque value of 9−10 in./lbs.
(1−5)
(REF,)
Receptacle
NOTE:
Some parts are removed
for clarity purposes
D. Crash Survivable Memory Unit (CSMU) Installation

(See Figure 703 or IPL Figure 1, Item 185)

CSMU INSTALLATION PROCEDURE
(1) Carefully guide the CSMU (1−120) cable thru the slot in the front chassis
(1−95).
NOTE: Apply Loctite to all screw installations for the following proced-
ures:
(2) Install the four screws (1−125) used to secure the CSMU (1−120) to the front
chassis (1−95). Torque mounting bolts (1-125) in a cross−pattern as shown in
Figure 704 to 75 in/lbs.
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
The document reference is online, please check the correspondence between the online documentation and the printed version.
AVIATION PRODUCTS
COMPONENT MAINTENANCE MANUAL
Model FA5000
Connector
Guide Pin
(1−45)
Figure 702.
Rear Cover Installation Diagram
(1−10)
(1−25)
23–70–30
Rev. 02 Page 704
(1−15)
(Qty. 6)
Torque
(9−10in/lbs)
Assembly
July 21/17