Alpha Antenna Alpha DX EMCOMM Operating Manual

______________________
Model – Alpha DX EMCOMM Antenna
Operating Manual, Version 1.4, August 3, 2020
Overview
The Alpha DX EMCOMM is a 10 to 80 meter capacity hat antenna rated at 250W PEP SSB, 125W CW, or 50W for sporadic
use of digital modes (25W for continuous use of digital modes).
Operation
The DX EMCOMM Antenna an ultra-portable multiband and multipurpose HF antenna that fits in an included Field Bag.
This system requires no moving clips on coils or readjusting of whips for tuning. An integrated leveling bubble enables
precise spatial alignment of all elements, resulting in equal take-off angles. You may also use an external antenna tuner
if your antenna is installed over a poor ground or not placed in a clear area.
Excess RF Exposure Warning
In the United States, the Federal Communications Commission has established guidelines for human exposure to Radio
Frequency (RF) electromagnetic fields. The commission's requirements are detailed in parts 1 & 2 of the FCC's rules and
regulations {47 CFR, 1.1307(b), 1.1310, 22.1091, 2.1093}. It is the responsibility of the owner/operator of this device to
follow all applicable warnings and precautions regarding human exposure to RF fields. Additional references:
http://www.arrl.org/rf-exposure
Site Selection/Propagation
Place in a center of a clear area for the following propagation pattern.
Support Contacts
If you have questions about your antenna, please feel free to email us at alphaantenna@gmail.com
Page 1