NOTE - Due to partial state-of-charge during storage and shipping, the cells inside the battery may not be perfectly balanced during the first few charge cycles. You may observe some high voltage alerts and cell balancing status codes on the Lithionics Battery® Monitor app, which indicate the balancing process is in progress.
4. Every 3 months charge the battery to 100% state-of-charge, then discharge the battery to LVC, then charge it back to 50% ±10% state-of-charge. LITHIONICS BATTERY, 1770 CALUMET ST, CLEARWATER, FL 33765 USA PH: 727.726.4204 | FAX: 727.797.8046 | WEB: LITHIONICSBATTERY.COM...
1) The battery must be in the ON position. 2) Bluetooth must be enabled on your device. 3) Open the Lithionics Battery® Monitor App and accept location permissions. 4) Under the Device List, select the battery you would like to monitor (the device name is identified by the battery serial number).
Page 7
The log files can be found under the settings menu and can be easily shared from the app for troubleshooting or analyzing battery history. LITHIONICS BATTERY, 1770 CALUMET ST, CLEARWATER, FL 33765 USA PH: 727.726.4204 | FAX: 727.797.8046 | WEB: LITHIONICSBATTERY.COM Page 7 of 11...
M8 Connector to Illuminated Remote Button, 16ft Length The CANbus messages are formatted for compatibility with RV-C protocol. The CANbus protocol and supported messages are documented and can be found at http://www.lithionicsbattery.com/user-guides. Please contact Lithionics Battery® regarding options for mating CANBus connections. Accessory Connector Pinout Description...
– The internal heater kit will warm the battery when the cell temperature is 35F and lower and will stop heating when the cell temperature is 40F and higher. LITHIONICS BATTERY, 1770 CALUMET ST, CLEARWATER, FL 33765 USA PH: 727.726.4204 | FAX: 727.797.8046 | WEB: LITHIONICSBATTERY.COM...
Troubleshooting & FAQ When troubleshooting your battery, one of the most helpful tools is the battery Status Code feature of the Lithionics Battery Monitor App. If the battery shuts down due to a protective BMS feature, please have the Bluetooth app available when resetting the battery to identify the battery info and status code.
Need help?
Do you have a question about the NeverDie Compact Series and is the answer not in the manual?
Questions and answers