Korg opsix Owner's Manual page 5

Introduction
Librarian and get going! Otherwise, follow the instructions below. Note that the process works slightly differently for
Windows 7, 8, and 10.
In some cases, the opsix may not be immediately recognized after installation. If this occurs, simply restart your
computer.
RNDIS configuration: Windows 7
After connecting the opsix to a computer running Windows 7, it will be visible in the Device Manger under "Other
Devices" and "Sound, video and game controllers."
Plug in the USB cable from the opsix.
1.
Open the Start Menu and select Control Panel.
2.
The Control Panel will open.
Click on Hardware and Sound.
3.
The Hardware and Sound window will appear.
Under Devices and Printers, click on Device Manager. The Device Manager will appear.
4.
Confirm that a new RNDIS device is present under "Other devices."
5.
Right click on the new RNDIS device and select "Update Driver Software".
6.
Click "Browse my computer for driver software."
7.
Click "Let me pick from a list of available drivers on my computer."
8.
Select "Network Adapter" for the device type.
9.
10. Select "Microsoft Corporation" for the Manufacturer and click "Next." 11. Select "Remote NDIS
Compatible Device" for the Model and click "Next."
A pop-up window titled "Update Driver Warning" will appear.
11. Click "Yes" to continue installing the driver.
Wait for the process to complete and close the window when done.
RNDIS configuration: Windows 8
After connecting the opsix to a Windows 8 computer, it will be visible in the Device Manger under "Other Devices"
and "Sound, video and game controllers."
Plug in the USB cable from the opsix.
1.
Open the Device Manager.
2.
There are various ways to do this, but the easiest is via the Power User Menu:
2a. Press the WIN (Windows) key and the X key together.
The Power User Menu will appear.
2b. Select Device Manager from the menu.
The Device Manager will appear.
Confirm that a new RNDIS device is present under "Other devices."
3.
Right click on the new RNDIS device and select "Update Driver."
4.
Click "Browse my computer for driver software."
5.
Click "Let me pick from a list of available drivers on my computer."
6.
Select "Network Adapter" for the device type and click "Next."
7.
Select "Microsoft" for the Manufacturer.
8.
Select "Remote NDIS Compatible Device" for the Model and click "Next."
9.
A pop-up window titled "Update Driver Warning" will appear.
10. Click "Yes" to continue installing the driver.
Wait for the process to complete and close the window when done.
RNDIS configuration: Windows 10
Plug in the USB cable from the opsix.
1.
Open the Device Manager.
2.
There are various ways to do this, but the easiest is via the Power User Menu:
2a. Press the WIN (Windows) key and the X key together.
The Power User Menu will appear.
3