IBM eServer xSeries 135 Quick Setup Manual page 5

Hide thumbs Also See for eServer xSeries 135:

You can manage your server remotely from another computer on the network or locally with a

keyboard, monitor, and mouse or other pointing device connected to your server. If you

manage your server locally, you must use the C2T device breakout cable. Connect the large

connector on the C2T cable to the rear of your server; then, connect your keyboard, mouse, and

monitor to the connectors on the other end of the C2T cable.

Note: The keyboard and mouse connectors on the C2T cable have keyboard and mouse icons

to differentiate them from each other. The monitor connector is the dark blue connector.

Repeat step 1 through step 9 for each server that you install in the rack.

– For information about using your appliance server configuration program, see the Installation

Guide on the IBM xSeries Documentation CD.

– For more information about input output (I/O) ports and cabling your server, see the User's

Reference on the IBM xSeries Documentation CD.

IBM xSeries 135 Appliance Server Quick Setup Guide