Table of Contents
Advertisement
HUAWEI Board
Product Description
5.12 Wireless Connections
The Board supports 2 x 2 Wi-Fi technology (that is, 2-channel input and 2-channel output of
Wi-Fi data), dual antennas, and dual bands (2.4 GHz and 5 GHz). The Board can serve as a
Wi-Fi hotspot or connect to a Wi-Fi network as a client.
If the Board is configured as a client, it automatically detects and connects to Wi-Fi networks.
You can set the Board IP address in DHCP or static mode. This function applies to the
scenarios in which no wired network is available and you need to connect the Board to the
Internet through Wi-Fi.
When the Board has its Wi-Fi hotspot enabled, it can serve as a hotspot for connecting other
devices (such as a PC) to Wi-Fi.
5.13 Content Sharing
AirPresence Mobile/PC Client
You can use either of the following clients for content sharing:
AirPresence Key
The AirPresence Key shown in Figure 5-8 also supports desktop sharing.
Issue 02 (2018-10-22)
AirPresence mobile client: enables document and image sharing, and supports screen
sharing when running on Android 5.0 or later.
Supported formats of shared files on Android: PDF, PNG, JPG, and BMP
−
Supported formats of shared files on iOS: PDF, DOC/DOCX, XLS/XLSX, PPT,
−
PNG, JPG, and BMP
Maximum size of each shared file: 30 MB for documents; 8 MB for images
−
AirPresence PC client: enables desktop sharing, including played audio and video files
and shared documents and images.
Plug the AirPresence Key into the USB port on the Board to automatically pair the two
devices over Wi-Fi. Then plug the AirPresence Key into the USB port on a computer and
press the button on the AirPresence Key to start sharing the desktop, including played
audio and video files and shared documents and images.
Both the AirPresence client and the AirPresence Key can share content in a meeting.
When one of them is sharing content and the other starts sharing content, the original
content sharing will stop. A maximum of three users can connect to a Board at the same
time.
The AirPresence Key can be automatically upgraded when pairing with the Board. The
AirPresence Key has two types of software packages: software packages for upgrades by
end users and software packages for upgrades by engineers at the production line. Both
end users and engineers can upgrade the Board software package using a PC. Upgrading
using a PC is applicable only to the production and depot repair scenarios.
Copyright © Huawei Technologies Co., Ltd.
5 Functions and Features
22
Advertisement
Table of Contents
