Advertisement
Table C: Auxiliary Contacts Listed for Use with SBS
Contact Part
Number
PM16P12C30
PM16P12A30
PM16P12B30
PM16P12S30
PM16S12S32
PM16P1416C30
PM16P1416B30
PM16P1416A30
PM16P1416S30
PM16S1416S32
PM16P1620C30
PM16P1620B30
PM16P1620A30
PM16P1620S30
PM16S1620S32
PM16P2024C30
PM16P2024B30
PM16P2024A30
PM16P2024S30
PM16S2024S32
NOTES:
1.
Instructions are included with each crimp tool for proper operation.
2.
Use of non-Anderson Power crimp tools can affect UL & CSA approval.
3.
Use appropriate reducing bushings for smaller cable sizes.
4.
For appropriate crimping die set, see APP
5.
TP0001 and TM0001 tools require locator TL0001 for pins and locator TL0002 for sockets.
®
6.
Contact APP
Technical Support for the most current information and assistance with product selection.
7.
PLEASE CONSULT WITH AN AUTHORIZED ANDERSON REPRESENTATIVE FOR RECOMMENDED TERMINATION TOOLING.
1.
Wire Preparation - Strip cable to dimensions shown in Table D.
Table D: Cable Stripping Dimensions
Connector Series
Contact Type
®
SBS
75G
Power/Ground
®
SBS
50
Power
Power
Aux Pin
®
SBS
75X
Aux Socket
Aux Pin
Aux Socket
®
NOTES: For SBS
75X - if using bundled cable, strip outer jacket to 2.05 inches (52mm). Cut power conductor 0.733 inches (18.62mm) shorter than
socket signal conductors. Cut pin signal conductors 0.51 inches (12.95mm) shorter than socket signal conductors.
Wire Size
#12 AWG Post-Mate Pin, 6.6mm
#12 AWG Pre-Mate Pin, 9.3mm
#12 AWG Pre-Mate Pin, 8.5mm
#12 AWG Standard Length Pin, 7.7mm
#12 AWG Socket
#16 - 14 AWG Post-Mate Pin, 6.6mm
#16 - 14 AWG Pre-Mate Pin, 8.5mm
#16 - 14 AWG Pre-Mate Pin, 9.3mm
#16 - 14 AWG Standard Length Pin, 7.7mm
#16 - 14 AWG Socket
#20 - 16 AWG Post-Mate Pin, 6.6mm
#20 - 16 AWG Pre-Mate Pin, 8.5mm
#20 - 16 AWG Pre-Mate Pin, 9.3mm
#20 - 16 AWG Standard Length Pin, 7.7mm
#20 - 16 AWG Socket
#24 - 20 AWG Post-Mate Pin, 6.6mm
#24 - 20 AWG Pre-Mate Pin, 8.5mm
#24 - 20 AWG Pre-Mate Pin, 9.3mm
#24 - 20 AWG Standard Length Pin, 7.7mm
#24 - 20 AWG Socket
®
catalog or website, or contact Technical Support at 978-422-3642.
"X"
Inches
mm
0.56
14.0
0.56
14.0
0.56
14.0
0.18
0.21
0.24
0.28
®
75X Series
Crimp Tool
PM1000G1
(hand tool &
locator)
TM0001 +
TL0001
Pin + TL0002
Sockets (Mil
Standard hand
tool & locator)
TP0001 +TL0001
(pneumatic tool &
locator)
4.6
For use when wire insulation OD is SMALLER than crimp barrel ID
5.3
6.1
For use when wire insulation OD is LARGER than crimp barrel ID
7.1
Insertion
Extraction
Tool
Tool
11038G3
PM1003G1
PM1002G1
PM1003G1
NOTE
-
-
-
Inspection
Tool
PM1003GX
PM1003GX
Advertisement
