Installation On Tilt - Uflex PADDLE TRIM Installation Manual

Installation on tilt

1
Attach the control device (1) under the mounting half-bracket (2) with the M4 screws (3)
and nuts (4) using a torque of 3 Nm (2.21 lbft).
For applications with dual command, repeat the procedure on the second device.
1
2
Before attaching the bracket to the tilt the surface that will be in contact with the bracket
should be thoroughly degreased. The half-brackets must be positioned so that they rest on the
tilt (5).
5
2
Installation Manual
3
4
- page
PADDLE TRIM
13