Running The Sample Program - HP 7750 User Manual

Running the
Sample Program
Note
2-20 Getting Started
Type :
R> r 0c000
You will see:
U>
The r command runs the processor.
Type:
U> b
You will see:
M>
The b command causes the emulation processor to "break" execution of
whatever it was doing and begin executing within the emulation
monitor. The "M>" prompt indicates that the emulator is running in the
monitor.
Type:
M> r 0c000
The emulator changes state from background to foreground and begins
running the sample program from location 0c000 hex.
The default number base for address and data values within HP 64700
is hexadecimal. Other number bases may be specified. Refer to the HP
64700 User's Reference manual for further details.