HP 7750 User Manual page 29

bc -d bp #disable
bc -e rom #enable
bc -d bnct #disable
bc -d cmbt #disable
bc -e trig1 #enable
bc -e trig2 #enable
To enable break conditions that are currently disabled, type:
R> bc -e <breakpoint type>
To disable break conditions that are currently enabled, type:
R> bc -d <breakpoint type>
For example, if typing bc gives the following list of break
conditions:
(items in bold indicate improper values for this example)
Type the following commands to set the break conditions
correctly for this example:
R> bc -d rom
(this enables the write to ROM break)
R> bc -d trig1 trig2
(this disables break on triggers from the analyzer)
5. To avoid problems later while modifying and displaying
memory locations, type:
R> mo -ab -db
This sets the access and display mode for memory operation
byte.
Getting Started 2-11