Kobalt KXDD 124B-03 Manual page 12

OPERATING INSTRUCTIONS
9. Auxiliary Handle
This drill/driver is equipped with an auxiliary handle
(G). For ease of operation, you can use the handle
with either the left or the right hand. The handle can
be locked in the two positions shown in Fig 9.
To install the auxiliary handle:
a. Remove the battery pack.
b. Loosen the auxiliary handle by turning the
handle counterclockwise.
c. Align the raised portion on the auxiliary handle
with the grooves on gear box of the drill/driver,
then slide the auxiliary handle onto the tool as
shown.
d. Hand-tighten the handle by turning the handle clockwise.
To remove the auxiliary handle:
a. Remove the battery pack.
b. Loosen the auxiliary handle by turning the handle counterclockwise.
c. Remove the auxiliary handle from the tool
WARNING
• For safety and ease of operation, securely tighten the auxiliary handle by turning the handle
clockwise before every use.
9
12