HP 33120A User Manual page 13

Chapter 1 Quick Start
To phase lock using the triggered burst mode
Shift Burst
2 Enable the burst mode on both instruments.
Notice that the
Shift
3 Use the menu to set the burst count on both instruments.
<
Recall Menu
After you enable the burst mode, the "recall menu" key will
automatically take you to the
4: BURST CNT
∨
4 Move down to the parameter level and set the count to "
Press the right or left arrow keys until the "
Then, press the down arrow key to display "
INFINITE
Enter
5 Save the change and turn off the menu.
The function generator beeps and displays a message to show that the
change is now in effect. You are then exited from the menu.
ENTERED
Next, you will set up the starting phase of the burst as shown on
the next page.
annunciator turns on.
Burst
BURST CNT
command in the
MOD MENU
INFINITE
" units are flashing.
CYC
".
INFINITE
1
.
".
11