Stokke TRIPP TRAPP User Manual page 5

AU
IMPORTANT –
RETAIN FOR FUTURE
REFERENCE – READ
CAREFULLY
Important information
• The Tripp Trapp® Baby Set is intended for use from the time your
child can sit unaided (approx. 6 months) until 36 months, 15 kg
or when the child can go safely in and out of the chair on its own
accord, whichever occurs first.
• Make sure the Tripp Trapp® Baby Set is properly fastened before
you seat your child in the Tripp Trapp® chair.
• Do not use the Tripp Trapp® Baby Set if any part is broken, torn or
missing. Contact Stokke if repair is needed.
• The seat plate must be in the top slot, and adjusted like shown in
these instructions.
• Only use the high chair on a flat, even and horizontal floor and not
to elevate the high chair on any structure or table.
• The maximum recommended load for the Tripp Trapp® chair is
136kg/300lbs, as the chair can also be used as an adult chair when
used without the Baby Set.
• Position the high chair away from furniture, walls, hot surfaces and
liquids, window covering cords, and electrical cords and position
the high chair away from furniture when the chair is not being used
at a table with a tray removed.
• The Baby Set, restraint system and Extended Gliders shall always
be in use when Tripp Trapp® is used as a high chair. The product
then complies with ASTM F404.
U S E R G U I D E
• The Tripp Trapp® Baby set should only be used on the Tripp Trapp®
chair in an upright position once the child is capable of reliably and
consistently sitting upright.
• The maximum weight of the child using the Tripp Trapp® Baby set
should not exceed 15 kg
• Make sure to regularly inspect and maintain the high chair.
• Always use the safety restraints and adjust to fit snugly.
WARNING
• FOLLOW THE MANUFACTURER'S INSTRUCTIONS.
• THE HARNESS MUST ALWAYS BE USED AND
CORRECTLY FITTED - MOST INJURIES FROM HIGH
CHAIRS ARE CAUSED BY FALLS.
• POSITION THE HIGH CHAIR AWAY FROM
SOLID STRUCTURES AND BENCHS TO AVOID
INURIES CAUSED BY FALLS AND BY ACCESS TO
DANGEROUS ITEMS.
• DO NOT LEAVE CHILDREN UNATTENDED.
Criteria for use:
• This Baby Set with pre-attached harness fits Tripp Trapp chairs
with model number/item number beginning with 1001, introduced
in Australia 2019. This version of the chair does not come with a
pre-attached harness.
Cleaning and maintenance
Wipe with a clean damp cloth, wipe off excess of water with a dry
cloth. Moisture will leave cracks in stain. We do not recommend
the use of any detergent. Colours may change if the high chair is
exposed to sunlight.
T R I P P T R A P P BA B Y S E T | 5
®