Table of Contents
Advertisement
6
FlipFlow daily safety check
Daily safety check
1. Set the FlipFlow to "FLOW" mode.
2. Approach the entry door and remain in the
safety beam zone of the open door for 10
seconds.
The door should not close.
3. Move forward one step and remain between
the door wings under the overhead door wing
safety sensor for 5 seconds.
The door should not close.
4. Move forward and repeat step 2 and 3 for the
middle and the exit door.
5. Beware, at the exit door the door wing safety
sensor is at the outside of the door header.
BAL_FF_TWIN_EN-USA_2V1_REC_121-006454534
IMPORTANT
Please perform once per day the following safety check
FlipFlow daily safety check
6
24/ 31
Advertisement
Table of Contents
