Table of Contents
Advertisement
3.2
Control panel position
The control panel BDE-S (for the selecting the operating mode) is located in the on the cladding be-
hind the cover of the entrance door.
The control panel BDE-S for the FlipFlow
3.3
FlipFlow traffic lights
Signaling depends on the operating mode selected and the choice of options ordered. The standard
basic version of the FlipFlow is equipped with a set of red, yellow and green LED-Strips on the en-
trance door. How the LED-Strips operate is explained under the various operating modes of the
FlipFlow.
BAL_FF_TWIN_EN-USA_2V1_REC_121-006454534
FlipFlow Twin description
This control panel is used to switch between the
various operating modes of the FlipFlow.
Switching to the CLOSED/LOCKED mode also
performs a manual reset of the system.
3
10/ 31
Advertisement
Table of Contents
