Summary of Contents for Kulzer PALA Palamat Premium
Page 1
Palamat Premium ® Betriebsanleitung Operating Instruction Mode d’emploi Instrucciones de uso Istruzioni per l’uso Gebruiksaanwijzing Das ist Zahntechnik.
Operating Instructions Polymerization unit for hot- and cold-curing resins Table of contents Scope of validity ............................... 2 General ................................... 2 Designation and type of the unit ............................ 2 EC – Declaration of Conformity ............................2 Information on safe operation ..........................3 Explanation of symbols ..............................
Scope of validity General Palamat Premium is a registered trademark of Kulzer. ® Name and address of the manufacturer: Kulzer GmbH Leipziger Straße 2 63450 Hanau / Germany These operating instructions apply to: Order no. Type Features Edition 66057661 Palamat Premium 100 V...
The unit is sensitive to shock, because it contains electrical components. Particular care must therefore be taken during transportation as well as storage. The equipment shipped by Kulzer was checked thoroughly prior to ship- ment. The unit is correctly protected and packed when delivered.
For possible damage coming from a fault / malfunction of the unit due to improper repair, which was not carried out by Kulzer service partners or by personnel trained by us or in cases where original spare / accessory parts were not used during a part replacement, Kulzer GmbH is not liable.
Operating Instructions Polymerization unit for hot- and cold-curing resins Scope of delivery 1 x unit, mains plug, operating instructions 1 x Compressed air hose, nozzle, hose clip Available as special accessories: 66009729 Silicone hose, red 66056911 Flask basket Description of the unit Front view - 5 - Cover...
Detailed view – operating panel 13) Home button 14) ACTUAL temperature display 15 –18) Interactive push buttons - 6 - Bottom 19) Micro USB connection Setting up, installation and putting into operation The instrument is to be mounted on a solid, non combustible surface (e.g. laboratory bench (H x W x D): 450 x 315 x 550 mm) in such a manner as to achieve a secure horizontal position.
The unit must not be heated without water. Minimum filling level: 4 cm. Even if objects are placed in, the filling level is always below the upper end of the air supply fitting. Do not fill the unit under running water. Kulzer recommends filling the device using a suitable container with a spout.
To switch on the unit, press the power switch (5) at the front of the unit. The power switch is lit and indicates that the unit - 8 - has been started up. The Kulzer welcome screen with the software version is briefly shown on the TFT display (3) start screen. 7.3.1 Edit program (customize individually) The device has three freely configurable programs (A / B / C) that are green / blue / purple color coded.
Operating Instructions Polymerization unit for hot- and cold-curing resins Pressure The pressure (BAR) can be switched on or off using the button (16) on the editing display. Pressure ON Pressure OFF 7.3.2 Display settings - 9 - Press the button (18) on the Home display to access the display settings. The display then changes to the Settings area. Display settings G.
To empty the water reservoir, use only a silicone hose with a temperature resistance of up to 120°C (248°F). A suitable hose can be ordered from Kulzer (Order No. 66009729 – silicone hose, red). The silicone hose is not included in the scope of delivery! When emptying the water reservoir, the silicone hose may heat up considerably.
We appreciate your comments, feedback, and suggestions. Contact in the countries and more information are available by the displayed QR code or at our website www.kulzer.com Micro USB port: (See section 5) The USB port is used for software updates, which may only be performed by trained service personnel.
Document history 2019-04 First edition. - 12 - Subject to modifications. Dated: 2019-04...
Page 14
Distributed in USA / Canada exclusively by: Manufacturer: Kulzer, LLC Kulzer GmbH 4315 South Lafayette Blvd. Leipziger Straße 2 South Bend, IN 46614-2517 63450 Hanau (Germany) 1-800-431-1785...
Need help?
Do you have a question about the PALA Palamat Premium and is the answer not in the manual?
Questions and answers