Connection Of The Uta Multibox To The Power Supply - Edenred UTA MultiBox Instruction Manual

4. Connection of the UTA MultiBox
UTA MultiBox
Instruction manual
to the Power Supply
®
• Remove the OBU from the bracket attached to the windscreen
• Connect the OBU to the connecting cable and then to the
• This connection must be made for the UTA MultiBox
• Then put the OBU back into the bracket.
• Make sure that the OBU is connected correctly. To do this, read
®
by pressing the plastic tab on the bracket.
power supply. Press firmly until you hear a click sound.
properly.
the information on the screen. If it is not connected, repeat
step 2 in this chapter.
to work
®
12