Huawei TalkBand B5 Manual page 49

Janus Online Help_en_V1.0
Janus Online Help_en_V1.0
iOS users:
1.
2.
3.
4.
5.
6.
Issue 01 (2018-08-25)
Open the Huawei Health app and touch Devices.
From the device list, touch the band's Bluetooth name.
Go to Alarm > Event alarm.
Set the alarm time, label, and repeat cycle.
Touch Save.
Swipe down on the app's home screen to ensure that the alarm is synced to the band.
 The Event alarm will sound precisely at the time you specified. If you set a label and time for the
Event alarm, the band will display the label. Otherwise, only the time will be displayed.
 When the band's alarm sounds, press the side button on the band, cover the screen, or perform no
operations within 15 seconds to snooze for another 10 minutes.
 When the band's alarm sounds, press and hold the side button or swipe right on the screen to turn off
the alarm.
 If you perform no operations when the alarm rings, it will automatically be turned off if you select
snooze three times.
 After your band restarts or re-pairs with your phone, to ensure the alarm rings at the preset time, it is
recommended that you open the Huawei Health app, turn off the alarm switch, and turn it on again.
Copyright © Huawei Technologies Co., Ltd.
6 Setting alarms
45