Fender Lights; Single Switch To Operate Fender Lights - Quantum Q6 Edge 3 STRETTO Owner's Manual

10 YOUR POWER CHAIR
Fender Lights (Optional)
Your power chair may be equipped with fender lights. The
lights are composed of three white LEDs in the front and
three red LEDs in the rear and are mounted on the fenders
of your power base. See figure 4.
NOTE: Prior to initial use, ensure that the fender light
switch is connected.
NOTE: If your power chair is equipped with an attendant
control, the fender lights will activate using the single
switch when the controller is turned on.
The fender lights operate through a single switch.
To operate the fender lights using the single switch:
1. Press the single switch once to activate the fender lights.
2. Press the single switch again to deactivate the fender
lights.
NOTE: Placing the single switch on the outside of the
power chair, for example, on the side rail, may increase
the overall width of the power chair.
WARNING!
The single switch should be mounted in a location that
is convenient for the power chair user and where the
switch harness will not be caught in wheels or running
Single Switch Fender Light
gear, pinched in the seat frame, or damaged when
passing through doorways.
Figure 4. Single Switch to Operate Fender Lights