IDEAL TightSight 61-740 Series Manual

Reference material. Scroll to page 2 for the recommended statement.
TightSight 61-740 61-760 61-770 series
Maintenance:
Switch off and disconnect the meter completely before carrying out any maintenance. Clean the
case with a damp cloth and mild detergent. Do not use abrasives or solvents. Keep away from
liquids and ensure the meter is completely dry before use.
Service and Replacement Parts:
This unit has no user-serviceable parts.
For replacement parts or to inquire about service information contact IDEAL INDUSTRIES, INC.
at 1-877-201-9005 or visit our website www.idealind.com.
SureTrace
Maintenance
Clean the case with a damp cloth and mild detergent. Do not use abrasives or solvents. Keep away
from liquids and ensure the tracer is completely dry before use.
Light Meter 61-686
CLEANING AND STORAGE
1. The white plastic light sensor should be cleaned with a damp cloth when
necessary.
2. When the meter is not in use keep the light sensor covered with the light
sensor cap.
3. Remove the battery if the unit is not to be used for an extended period of time.
4. Store the meter in an area with moderate temperature and humidity (refer
to the operating and storage range in the specifications chart)
61-795 61-796 61-797 61-521 61-164 61-065 61-076, 61-340, 61-342
Maintenance
Clean the case with a damp cloth and mild detergent. Do not use
abrasives or solvents.
61-063
Maintenance
Do not attempt to repair this tester. It contains no user-serviceable parts. Repair
or serving should only be performed by qualified personnel.
Cleaning
• Remove grease and grime with a clean, dry cloth.
• Do not use abrasives or solvents.
61-486
Maintenance
Do not attempt to repair this meter. It contains no user
serviceable parts. Repair or servicing should only be
performed by qualified personnel.
Cleaning
Periodically, wipe the case with a dry cloth and detergent. Do
not use abrasives or solvents.