Tools You Will Need; Mounting Space - Samsung SMH1711S Installation Instructions Manual

TOOLS YOU WILL NEED

# 1 and #2 Phillips screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles

MOUNTING SPACE

16-½ "
Installation Instructions
Pencil
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Level
30"min.
2"
Backsplash
Ruler or tape measure
and straight edge
3
Electric drill with / ", ½"
16
5
and / " drill bits
8
Stud finder or Hammer (optional)
NOTES:
• The space between the cabinets must be
Bottom edge of
cabinet needs
30" wide and free of obstructions.
to be 30" or
• This microwave oven is for installation over
more from the
cooking
ranges up to 36" wide.
surface
• If you are going to vent your microwave
oven to the outside, see Hood Exhaust
Section for exhaust duct preparation.
• When installing the microwave oven
beneath smooth flat cabinets be careful
to follow the instructions on the top
cabinet template for power cord
clearance.
• The dimensions provided are the
minimum required for mounting the
microwave oven. Local codes and
practical use of the range will likely
require more than 13.5" shown between
the range and the bottom of the
microwave.
7
Carpenter square
(optional)
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Duct and masking tape